(<back)

HP Laserjet 4000/4050 Paper Feed
Repair Kit Instructions




Tray 1 Pickup Roller

Removing the Pickup Roller (shown with Envelope Entrance Cover
removed - above diag)
1 Open Tray 1. The Tray 1 Pickup Roller is in the center of the
Tray 1 Pickup Assembly.
2 Grasp the Envelope Entrance Cover and pull it straight away from
the printer.
3 Pry open the blue latch on the roller.
4 Lift the roller out.
Hint To replace the roller, make sure the pin in the roller lines up with the
hole in the shaft.

Paper Feed Rollers

The following procedure is the same for all HP LaserJet 4000 and
4050 series printers; there are 2 Feed Rollers for the HP LaserJet
4000 T/4000 TN and 4050 T/4050 TN and one Feed Roller for the
HP LaserJet 4000/4000 N and 4050/4050 N printers.

Removing the Paper Feed Rollers (HP LaserJet 4000 T/4000 TN and
4050 T/4050 TN shown - above diag)
1 Remove the tray(s) from the Feeder. The Paper Feed Rollers are
inside the Feeder.
2 Pinch the release at the left side of the Roller and slide it off the
shaft.

Separation Rollers

Removing the Separation Rollers (above diag)
The Separation Rollers are inside the paper trays.
1 Release the latch and lift the cover inside the tray.
2 Pinch the release at the left side of the Roller and slide it off the
shaft.

(<back)