High
power, high reliability UPS range. Models
from 5 kVA to 11 kVA. 3 phase 400 Volt and single
phase input options. Single phase 230 V out.
Double Conversion UPS technology. |
- Designed
for high density server and industrial environments. Density
optimised design. Meets Marine vibration test requirement.
0-45C temperature.
|
|
- Applications
in server farms, telecoms, networking, VoIP, medicine, PLCs,
industrial control & measurement. Emergency lighting battery
cabs available.
|
|
- True
On-Line double conversion. Sine wave output. Wide input range
accepted without switching to battery (156 - 280V or more).
Power factor correction. Industrial mode gives continuity
on 3:1overload or short circuit.
|
|
- Rated
for 0.9 power factor. 97% efficiency in economy mode, 91%
in normal mode. 40 to 70Hz Input range. Can act as a frequency
converter.
|
|
- 10 Minutes
Backup at 70% load with 1 battery. Long runtimes with up to
6 battery units. 15-20 mins with EXB giving 9U format or 40-60
mins with 2 EXB in 12U.
|
|
- Modular
construction. Hot swappable UPS & Battery Units. Redundant
power feed as standard. Manual bypass for maintenance. Remote
emergency power off (REPO)
|
|
- Inlets
and Outlets via terminal wiring blocks to a wide range of
rack power distribution outlets. Can hardwired into building
distribution scheme
|
|
- Comprehensive
range of Power Distribution Units (PDUs) for use in rack systems.IEC
and UK outlet options. Galvanic isolation transformer option.
Remote control options.
|
|
- Freestanding
tower form or 6U rack mount. UPS and batteries 3U. Up to 8
modules on caster kit for optimized footprint with hot-swap
and long runtimes
|
|
- LCD
Control Panel with intuitive menu. Shows wattmeter when idle.
Multilingual capability. LED Indications or status. Dry relay
contact remote status
|
|
- Remote
supervision included on netpack options or choice of communication
cards. Event log for easy fault detection.
|
|
- Interfaces
RS232, Remote control relays & optional Ethernet or Modbus/Jbus
with Netpack.
|
|
- Integrates
with HP Openview, IBM Tivoli and CA Unicenter. HTTP, SNMP,
Telnet management support
|
|
- Integrates
with building management systems via Jbus. Temperature and
humidity sensors trigger orderly shutdown. Wide Genset compatibility
|
|
- Automatic
battery test at user schedulable period. Battery condition
warnings. Option to protect against deep discharge
|
|
|
Online |
|
3 Phase
400 Volt or 230 Volt 3 Phase 400V (-20% , +15%). Or 1 Phase 230
Volt (-30%, +20%) |
|
230 Volts
200/208/230/240/250V +/- 2%; THDU < 2% |
|
RS232 and
relays as standard. Minislot for Netpack |
|
1 year including batteries. Optional extension. |
